MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Prusa i3 - Cable Chain Management ...

by Bantum_Works Aug 7, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

I congratulate you on your great work.
I would like to ask if it is possible to rotate 90º the motor link of the extruder to be able to adapt it to a greg's wade extruder
Thank you very much

Hi Oscarbr,
Certainly - will take a look at what's needed & get back to you ... :)
Cheers, Bantum ...

I must be doing something wrong. I spent 30 minutes trying to put two links together. I can't get them snap together for anything. printed in PLA, .2mm layers.

Yes there is a bit of a trick to getting them in, you'll need to squeeze ( with assistance from pliers if need be ) at thin edge of one end @ a slight turn angle & push into the other with reasonable force - you'll know when it's in when it snaps into place. Once you've done a few you should get the hang of it - only takes a few seconds to do ... Ciao, Bantum ...

Had a few issues with the 'Bed Cable Link' fouling on things, so have made an alternate 'Bed Mount with Return' - Yet to print it & see how it goes ... :)