Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

2n2r5

Magic Wallet v2 - w/ Dualstrusion and Printable Straps

by 2n2r5 May 29, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

When I try to open the customizer it tells me "error while loading shared libraries" ? Is this Thing just too old ;) or am I doing sth wrong?

Sorry, I haven't looked at this site in ages. Chances are, there was something that I used that is no longer supported. Feel free to take the script and use it however it works best for you. I will change the licensing to Public Domain.

Thought so when I saw the first comments from '13 :-)
Don't worry, I'll figure sth out - and thanks for the reply!

Wish you had this in a DXF file as well. Love love love this !!

will it work with PLA

will it work with PLA

Great job and nice photo background!

how to print the blue one in the picture???

I just printed this, assembled it and thought... Wait a second, if I put my business cards or credit cards in there, they'll just fall out! There is nothing holding them in place!
My search continues for the perfect business card/credit card holder.
But good job nonetheless.

Awesome wallet. Love that it's in Customizer!

One suggestion: Rename the "print" parameter to "part" and Customizer will automatically render all of the parts into the generated Thing. That is, you'd end up with an ST for the "red" the "green", straps, letters, etc., all attached to the resulting Thing. Which is very convenient.

Hey! Thanks for the tip. I was trying to figure out if there was a way to do that. That will come in real handy for my next project which is going to have to be printed in a couple separate prints.

seems that the straps are just barely bigger than the holes on the short ends, and i can't quite get them to go in. how is it supposed to be done? love the design!

the straps are actually the same size minus - tolerance (setting in customizer), What I do is trim the hole of any over fill then slide one corner of the strap through the hole. Then use a finger nail on the lip of the side that isn't through yet and push from the back. I have gotten good at at the process and knowing when to remove a little more material from the hole.

It definitely gets a little tricky, especially when you are working on the last one.

the wallet is awesome, but one of the straps broke when I was removing it. Do you have a file of the straps?

There is a setting under the advanced tab to print just the straps. I don't have a setting for the individual straps but the straps only file takes about 7 minutes to print.

Thanks man. I hope you will upload photos of you wallet when you print it out.

A SHEETZ CARD! you are an amazing person.

Ha, actually, Sheetz MTO is amazing. I just eat there.

i used to have a wallet just like this, except it was orientated portrait instead of landscape, maybe changing it to portrait would give it more stability while closed?

I am trying a wider hopefully more stable one from customizer. I am going to update the customizer with the ability to change x and y axis dimensions to the same ranges and also a 2 hole option in place of the single center band.

love the customizable option! exactly what i was looking for for a different project!

I'm glad you like it. What project are you working on?

i serve part time at a restaurant and i wanted to make a book that has a flat surface I could write on and then be able to open up and hold credit cart slips and cash, this is perfect i can make it the right dimensions