Instructions (stl file)
- print all 3 parts
(tested using PLA, layer 0.2, perimeter 6 layers, infill 80%-100%,
- use a M4 bolt and self-locking nut to tie the noose and link parts.
Attention to parts position.
- use a M4 bolt and washer and nut to place the micrometer.
Modifications (scad file)
To use the micrometer.scad file, you also need the library fast-clamp05.scad added here for your convenience.
- Digital micrometer (ebay) diam. 8 mm.
- 1 x M4 bolt 35 mm long and self-locking M4 nut (for clip)
- 1 x M4 bolt 20 mm long and M4 nut and M4 washer (for micrometer)