MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Depending on printer calibration this could be a loose or tight fit, such are the fine tolerances required for bearings.
However if it is tight, you can run the bearing up and down an 8mm drill or threaded bar, or if it is too loose you can gently (emphasis) heat this with a gas lighter to make the vanes slightly pliable, and lightly lever a vane or three with a small screwdriver to adjust tightness.
More from 3D Printer Parts
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving Gyrobot a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.