MTG is all about casting spells, so why not keep your spells safe in this Magical Spell Book.
UPDATED: 10-9-16: NEW VERSION: Thicker hinges that are more sturdy and a new cleaner cover that doesn't require much support.
Pokemon Fans: Check out my Real Working Fully Functional 3D Printed PokeDex
First, choose which configuration of the book you would like:
STEP 1: Choose either:
Small: Holds up to 75 sleeved cards - has a spot to store one Spin Down
Large: Holds up to 150 sleeved cards
STEP 2: Choose one:
Normal: Has no way to keep cover shut.
Magnet: Uses 1/8" x 1/16" Rare Earth Disc magnets to keep it shut. Super glue them in.
TieString: You can use a piece of string or ribbon to hold it shut.
Once you've chosen, go to "Thing Files" and choose a zip file.
Open the zip file and you'll see that there are more choices:
Back: The back cover and spine of the book. Print this with NO SUPPORTS.
symbols: has the symbol for each Mana type
Pages: The pages of the book. Print this with NO SUPPORTS.
deck: perfectly sized to put a deck with a spot for your Spin Down
empty: completely empty if you want to store your dice, counters, or anything else
Cover: The front cover of the book. Print this with EXTERIOR SUPPORTS.
spellbook: The words "Spell Book" are embossed.
blank: nothing is written on the cover
Rod: This is the pin that goes in the hinges. Print this twice with NO SUPPORTS.
Shove the rods in the hinge holes and glue in place with super glue.