Have you ever been in the kitchen and made a mess? The better question may actually be: when have you ever been in the kitchen and not made a mess? This handy broom and pan make for easy clean up in the kitchen. It has the brilliant design that allows it to have the cleanup power of a regular-sized dust pan with the convenience of just reaching to your fridge. Don't fret about the mess. Just use the "Mini-Broom & Dust Pan!"
This dust pan can be stored in any drawer or can be attached to a fridge with the addition of a magnet. The brush and dust pan also snap together for even easier storage!
Here is a video of the dust pan in action: https://www.youtube.com/watch?v=mNIj3x1sEL4
Print out one of each file. When printing the "bristles" file, stop the print after the first layer.
After you have collected the bristles off of the build plate, cut them down to size and then connect them together. The easiest way I found to do this is to melt the ends of the bristles together with a soldering iron.
After you have your bristles created, place them within the brush. Again, I used a soldering iron to sort of "weld" the bristles to the brush. I also added super glue to ensure that the bristles would stay in place.
Finally, I closed the two brush halves together. This is designed to be a tight fit and may require some slight sanding.
If you would like to add a magnet to your dust pan, it is designed to hold a 3/8" x 3/8" round magnet like this one (http://www.amazon.com/gp/product/B000TKH2W0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1)