I wanted a tyre that would serve well on winter and summertime, and after some testing I have come to this design. It is durable enough to withstand some rock impacts, and also it has enough surface on the outside to stand well against mechanical abrasion.
The grip I get out of these wheels is great!
It fits on the standard 1:10 RC torque transfer nuts (12 mm), and has a hole for 4 mm shaft.
- Print two of both wheel types, flat side down. I have found 0.2 mm layer height and 0.5 infill to work great. I recommend ABS plastic. Support is not needed, but it might help with printing the mounting nut recess.
- Mount scoop facing the driving direction so that it grips whatever gets under the tyres.
- Have fun!