Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

chrisantoun14

Updated Printrbot Simple Metal Feet

by chrisantoun14 Feb 6, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

! printed a set and they fit just fine! Very strong too. Thanks for the fine design!!!

I printed these and they're super brittle. The little fins break off super easily. I'd recommend sizing them up 1-2% just to give yourself some wiggle room.

I think you may have layer adhesion issues with your printer because although they fit snugly on mine, they were never close to breaking

These printed very nicely. The 3/8" diameter holes for vinyl or felt feet was a great touch. The back feet definitely need to be modified to fit around the rivet. I printed the stock feet, and then removed 0.190" on my mill from the back supports.

@ElmoC I also had that problem and I am planning on updating the design soon. In the meantime, if you cut ~.1 inches off the top of the clips where they don't fit it should slot right in.

Printed these up today but they won't fit. There is a rivet in the back corners of my unit that prevents them from attaching.

Same thing with mine. They printed great, but they don't fit the newest Printrbot Simple Metal. I should be able to cut a piece out to make them work.