This is my first multicopter design, inspired by a DJI 550.
The wingspan is 580mm and is compatible with props up to 10". My setup has 2212 sized DJI 920kv motors and 30A Mystery -SimonK ESC.
Ardupilot system APM 2.6,ext GPS+compass, telemetry.
GoPro+ video transmitter.
Im using 3300mAh 4s battery and has ~12-15min flight time atm.
But two new 5000mAh 4s is ordered such as new 9047 carbon props :)
Print time: @90mm/s ~36h, PLA 210c / 50c heatbed. ~500g @ 30% infill.
First test Video:
3300mAh, 8045 carbon props.
"Night-flight" leds: https://www.youtube.com/watch?v=dHxybphx4TY
This is a on going project and i will upload new files along progress is made.
LEDs, gimbal, latger battery bank, 9" props.
I am not the designer of the gimbal/motors/antenna/props or the gopro.