Just a simple workbench plate. Allows to work safely on board during testing / installation phase. Also keeps it cool.
Mounts for dual 45mm fans.
4mm standoffs, vent holes under drivers, main chip and a few random ones. About 3mm clearance from board to fan mounts.
4 x 4.5mm mounting holes
- Made larger holes for fan mount- 4.5 x 6.5mm - will work for fans with hole spacing of 34 to 41mm.
- Fan mounting plates are 1mm thicker
- Tested with v1.0a board, adjusted holes for board mount.
- Added version without built-in standoffs - so that nylon spacers could be used.