Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Masterclip

T2 TERMINATOR BATTLE DAMAGED BUST

by Masterclip Dec 1, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

One of my first prints. After a few tries, I finally figured out was wrong. The raft is offset to the rear by about 1/2" and doesn't cover (or under cover is probably the right description) the whole footprint.of the bust Because of that, I found that I had curling or lifting on the front edge which caused me to waste a lot of filament and time from failed prints. Having said that, I customized the build so that it DOESN'T have a raft and I blew it up to life size which, along with temp settings of 210 for the PLA, 60 for the bed and 1mm side wall thickness and a 10% infill seemed to work the best for me. I'm using a CR-10.

It looks to me that the photos of the painted head are from hot toys rather than the 3D print.

Yes, it is... is the reference i used for modeling this 3d model... like many others in my list, i used an existent figure for modeling

Build it in polyjet.
Fine, nice model.
Thumbs up

Hey Sherlock_Filechecker ,can u post some pics ?

Suck without color D:

Interesting, very similar to mine I posted back in July, but a bit more comical. I think that hair isn't going to come out so well in the print, I tried that sort on mine but it ended up ruining the print right at the very end with goopy hair bits, hence the reason I combed it back.
http://www.thingiverse.com/thing:393851

T-800 Damage Bust (28MB)
by Geoffro

Yes, yours model´s are great ! i Hope somebody try to print this and remix it later for better prints....