MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Stephenson Rocket 1:32 train (1:32, OpenRailway)

by UTJTrain Nov 27, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Sorry for the late reply. That's right. Have now changed the Cylinder files
these are now mirrored so that it ends up right on the Rocket. Sorry about
the mistake, but it is something that happens sometimes.
UTJ train

I am currently printing this as I type and I have made one modification. All the images I see of the real one or replica's have the 'Piston Cylinder with the Steam Pipe' on the right hand side as you look toward the front. I have mirrored the two cylinders and will assemble as such.
I have one question. The offset for the Drive Wheels. What degree should they be? I am thinking 90 but since I cannot see both sides to compare I am at a loss.

Comments deleted.

I printed this on an Original Prusa MK3 using Prusa Control. It has worked out well. I hope to spend the next few days painting and the final assembly of this model.The only problem I have had is trying to figure out how the engine connects to the tender. I see how the link connects to the floor of the engine but there appears to have no place where the link attaches to the tender. A GREAT model!!

Anti-slipping rubber mounted. The size of the rubber is 70 mm x 5 mm. Note the 70 means half of the perimiter ?!?.
Please see https://www.thingiverse.com/thing:2783406

Current Pickup and Spring Generator for Gauge G (IIm) and Gauge 1
by PrinGer

Having trouble with item 6 & 7 the support does not seam to be there as it tries to print in mid air, all the rest of the files print ok so fat thanks for the rocket

This thing looks awesome!

Hi Hobby3D
I have designed the Rocket in scale 1:32 a Gauge 1.
So I have no files in H0 scale. If you want you can try to reduce all files with 37% in your print software. And see how it will be. it will become small anyway, depending on which machine you has the result will be different, good / not so good, maybe.
If you try, to please write down a comment

Ps. The risk is that some walls will be too thin or none at all.
Best wishes
UTJ train

hello ,
I can afford to ask if it is possible to download the same model train HO scale 1/87 ? I would be most grateful. :-D

thanks, see you soon

Have not seen any printed curves.
A variation is that you can use aluminum profile 3x10 mm, we use this in our garden railway.
see more at my website

The downside is of course that it is not 3D printed

Are there any rail/sleepers you can recommend for a curved track that will fit this locomotive? We're looking to make a loop using straight track and half circles at both ends. Any help appreciated!

Awesome print, mine has so far been printing very well, train looks awesome and works great.
Keep on designing!

Thanks for that. I will try to do that.

Looking forward to see a picture of your locomotive copy.

Hi. Sorry to hear that. I have no problem with this. my files are stl format. g-Coden made of your slice programs so that's where it fails. I think, but we must wait and see if there are some more that have problems with this.
try to print the boiler from another side, the back if you now have printed the standing.
regards Goran.

when printing part number 3 it prints half the part then then bed lowers about 1/2 inch are wiggles around in the air like its printing for 2 or 3 min then says its done, its like layers are missing in the gcode

I finished making the engine. Looks good, Will print out the wagon next and make that. I printed one out from other person that set it up for a motor. My grand son is working on that one. Keep up the good work.
Thank you

Finished :) Thanks for sharing these files.

Comments deleted.

Inside the front wheels. Spring package. to be glued.
See the picture of the bottom plate and barrel without wheels

Comments deleted.

Great design, I will be trying to make my copy for Christmas!
What design software did you use, and would you be prepared to share the original designs so I can try to motorize it?
If possible, a format compatible with 123D would be great!

Comments deleted.

I appears that there is a right and a left side for the long side on the wagon, one being a mirror image of the other. The cutout on the rear side for the high short side part will be in the front on the right side and rear on the left side. Can you add that file to your list because I have no way of making a mirror. So far everything has printed great. Love this engine. Now I just need to figure out how to power it. Are the carriages coming in the future?

Sorry I missed this. have now downloaded a right and a left side.
As it would have been from the beginning. Will arrange for the carriage. pretty soon

Thank you for informing me of the mistake

I missed adding up the front axle as right-left half of No. 21.
Have done this now.
The two halves will be glued together.

thanks for that

Perfect as all of your stuff. I will make it fit my LGB trains, so the parts make a trip around Netfabb. It will be a nice Christmas Pressent for my self :-)