Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

f3rdys

MiraCube with 1 hotend V1.5

by f3rdys Oct 9, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Ciao, è possibile avere la lista di quanti pezzi stampare?

Ciao, questa è la versione 1.5, evoluzione della 1.0, nelle descrizioni qui trovi solo le differenze, nella 1.0 al link http://www.thingiverse.com/thing:358878/#remixes
trovi tutto il resto.
f.

MiraCube V1.0
by f3rdys

Hi,
my linear bearings have some wobble in the carriages. Is this wanted? Or have you wrapped some tape around the bearings?

Hi shackfu,
no, I have not wrapped some tape around the bearings.
The wobble in the X-carriage is very small and the hot-end is at exact center of the carriage, so this wobble don't affects the quality.
On the Y-carriage there should be no oscillation, if you have some wobble on this carriage you must remedy in any way also with some tape around bearings.
The only wobble that affects on the final quality is the Z-wobble for the use of the threaded rod M5. In this case you can use a trapezoidal screw, but in this case you must redesign some things.

Hi, can you tell me how thick the aluminium rectangular tubes are?
20x10x1,5mm

Hi shackfu,
the thickness itsn't very important, but usually is at least 1mm

Do you have a file for your drive pulley?

I just added the missing file 30_Extr_S_Gear.stl

arrivo dopo la puzza..... perchè l'ho vista solo ora...... carina la stampante........ bella Ferdinando....
Un salutone