MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Cable Organizer Clip

by magicxman Feb 3, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

I like the design.
I used Slic3r and a TEVO Tarantula to make it.
On the first print, the print would come loose from the bed after approx. 20 layers (of course that was NOT an issue with the design!).
However, I found out that the design is also usable in this, much shorter form! It may even be more handy...

I like the design but have not been able to get it to print. I use Slic3r which gave me some errors so I sent the file up to netfab to fix. Now it appears to work but when printing the sides do not print correctly, either not there or too thin to make a wall.

I would like to make this but it doesn't seem to slice correctly. I'm new, is there something I need to do differently with this model?

Which slicer are you using? For the model above, I am using Cura and Kisslicer. Printing on Ultimaker with 0.1mm thickness, 30% fill and on ABS white.