A wall mounted rack for holding your whiteboard markers. Can hold up to four markers.
Keep your whiteboard weapons close at hand with this rack. Like the office samurai you really are, you will be ready to paint the board red at the slightest provocation. Or whatever color you want, as long as it is red, blue or green. Or let the demonic darkness of black engulf the board and watch your coworkers despair!
Print as shown in the print software screenshot. This will give the strongest part possible. Feel free to add layers if you want a stronger holder that can stand more abuse.
Prints just fine with no supports or rafts needed. So no wasted filament.
"Will my markers fit?": This is suitable as is for markers up to right below ?20mm (0.7874in) My markers were ?19.5mm. Tough this is easily scaled up or down in your print software depending on what you need. Just make the holder a little larger than your marker and you are good to go.
As with all 3D-printed screw fastened things, be carefull when tightening the screws. The screw basicly funtions like a wedge and can easily delaminate layers, even with a small electric screwdriver. Especially true on ABS. Pay attention when tightening the screws.