MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Toyota Prius Wheel Center Cap - ZAP

by schlem Jan 22, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

I'm printing one now. First attempt failed. It needs a brim. I used a 6mm brim and it's holding together. Trying it without supports.
Will see if it works. Shouldn't matter if the inside is not a clean bridge because it's not visible.

Haha This was never designed for FDM printing. Good luck, and I hope you'll share your build.

Worked quite well. Will be interesting to see if I can get them to press in without breaking. I printed them with PLA. I'll likely heat them before pressing them in to make sure they are more flexible. They are rough but they are not designed to be looked at close up. Just to cover the hole that is there. I may throw a coat of silver spray paint over them. This example has a clear coat on it. Was printed at .20 layer height.

Way cool, if the test one sizes up well my Prius will be sporting new centers by tomorrow afternoon.