After printing, found some little problems with support for overhanging parts. Fixed and splitted STL in 3 parts, to easily fit in printer plate.
A J-Head Bracket mount for Prusa i3.
It can hold the servo motor to accomplish the AutoBed Levelling in Marlin Firmware.
Should fit tight, created with Autodesk Inventor.
1x 20mm Fan
4x 2x20mm screws (for the fan)
2x 3x60mm allen bolts
2x 1.75x15mm screws
2x 1.75x25mm screws
Print @ 40% infill honeycomb, 2 perimeters, 3 layer top/bottom