This is my E3D Hemera Mount backplate for the HevoRS.
Use the following project as your frontplate:
Amazing work by @Lukes_Laboratory
Edit 07.12.2019: Added a saftey endstop bracket. This bracket is only needed if you are using the omnipack and sensorless homing.
Edit 5.12.2019: Added a backplate version with support. For now, you need to screw into the carrier mount.
Edit 3.12.2019: Fixed the nut hole size and made the mounting holes a little larger (3.2mm) to make it a better fit.
I also made the screw sockets larger that a 3mm socket screw will fit