Skidward - the scared road racing cone!
"Focus on the track. The open unintimidating track. Focus on the track. There is nothing but the track. FOCUS ON THE CONES. WE'RE HEADING TOWARDS THE CONES."
Inspired by one of my favorite Blipshift shirts, I just HAD to make a 3D model of him to combine two of my favorite hobbies.
Both the cone and the base print standing up, support free.
No support required for the tongue.
Use support for both the eyes and the black eye inserts (pupils).
I'd recommend printing the eyes and eye inserts at a fine resolution if possible (.1mm layer height).
The parts will fit together without any glue, just press the parts together. I did, however, apply some superglue to the tongue to prevent it from popping out. The cone should pop into the base, you may need to squeeze the cone a bit around the edges to get it to pop in.
He also makes a great Nerf target!
Recommend .1mm for eye parts, .2mm for cone and base
Orange, Black, White, Red
Cone and Cone Base print standing up with no support.
Tongue requires no support.
Eyes and eye inserts require support.