Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Raven_Kilit

Anbernic RG350 stick generator

by Raven_Kilit Nov 8, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

The central hole keeps closing up on me during printing; any suggestions?

I have never used a resin printer, I am not an expert. If when you have finished printing, some liquid resin remains inside the hole, after washing with alcohol, use compressed air to blow away the excess resin.It also depends on how you print the model. Maybe you should change the printing method, generating the supports differently

I was thinking along the same lines. The hole seemed to have closed up during printing, since no amount of scrubbing could open it further. I was thinking about raising the temperature of the resin to help it run out, but changing print angles is a good idea too.

Well let me know if you can print the sticks. I'm sorry I can't help you more

Thank you for your work, do you recommend PLA for this ?

Thank you very much! It is best to use the resin with a sla printer. The piece will be more precise and clean. Another user managed to print it in pla, but it is impossible to print the grip with an fdm printer. He also had to use sandpaper to make the stick smoother