I include the files for the truss and the chassis mount for the panhard bar.
You can use the stock screws to mount these two pieces on your truck.
Here is the list of the hardware that you need to buy to make this mod:
-Scx10 ii aluminum servo mount (I've got it cheap from amazon);
-M3 or M4 threaded rod (i went with the 4mm one since I couldn't find the 3mm one);
-Rod ends (i used the included ones in the aluminum link kit and expanded the hole with my dremel);
-2 M3x20 nuts and bolts to secure the panhard bar.
You may have to make a longer steering link in order to get the maximum turning radius (mine is about 95mm).
Sunlu PLA or ABS