Canopy comes from Dave_C_FPV 's Microblivion || frame. https://www.thingiverse.com/thing:3792194
The actual frame is made by me myself :D
There are 2 versions now:
It is now 100% finished.
YOU WILL NEED:
- 4x nylon hex standoff m2x6
- 4x nylon screw m2
- 4x nylon nut m2
- Preferably 40/50mm prop. (any bigger won't fit) for 95mm frame.
- Only 65mm prop for 100mm frame.
- Some hot glue to fix camera in canopy or T7000 glue in my case.
Frame is designed to fit 0802/0703 motors. Just like Snapper7 for an example.
Perfectly fits 2mm standoffs just like in micros.
UPGRADED 100mm FRAME
Printed on Ender3PRO with CURA 4.3.0
210C EXTRUDER 60C BED
90mm/s 100%infill SUPPORT OFF
0.2mm layer high 1mm wall thickness
At this point it took me (printer) 56mins to print with 6g of PLA WHITE