Enclousure for 3D printer electronics, it fits an Einsy Rambo and Raspberry PI 4 plus two LM2596 DC-DC converters to power the raspberry and ligths with proper voltage. It also has forced cooling with a 5010 24V fan, designed to extract air from the box.
This box has been designed so no holes have to be made into the lateral pannel of the cube. Also, keep in mind that the aluminium profiles are 2020, not 3030, if you want to use this box with a 3030 aluminium profile, you must modify the "Soporte Electronics.stl" file so it fits your needs.
External box dimensions 220x120x55 without the support bracket. Keep in mind that your print surface must be bigger than 220x220 in order to print this box.
Designed by Xavi.
XaviCube3D (Custom Printer)
It can be printed without supports, small columns and sacrificial walls have allready been inserted into the .stl file so all bridging can be done with 60% part fan cooling.
Beware that the box dimensions exceede a 200x200 bed, so check first if your printer can handle the box