MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Building this Raspberry Pi-to-go is not for everyone. Wiring all the electronics together does require some basic soldering and knowledge of basic wiring. Lets get started.
Step 1: Print all pieces.
Step 2: Snap screen portion to the base portion.
Step 3: Snap on right side cover
Step 4: Wire all electronics by following the instructions found here: http://blog.parts-people.com/2012/12/20/mobile-raspberry-pi-computer-build-your-own-portable-rpi-to-go/
Step 5: Snap on left side cover
Step 6: Screw on back cover with four 2mm x 6mm screws
Step 7: Comment and ask questions for help.
More from Computer
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving partspeople a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.