Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Runar1

Bondtech BMG+E3D v6+X-carriage mgh12 block

by Runar1 Sep 9, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Got my rails.. Iam looking at your remix now.

The mounting plate.. I see the bottom mounts for the belt.. But the mounting post on the top, what is that for?
On the mounting plate for the rails you have extruted the holes, this will leave a gab between the mounting plate and "the tank"

I will try to get the prusa cable guide mixed in your remix :)

Cheers

Still using this? Finally got some rails and I am interested in printing this design.

have you had a chance to actually use this yet?

Hi, I've been trying but I will make some changes which is going on.

Nice.. Are you testing your design and doing upgrades for it? I have not gotten my Linear rails yet, but iam thinking instead of cablechain maby there is room between stepper and backplate for the cables to route out (Like prusa mk3s) Also could you add a ptfe clip space?

Cheers
Michael

Hi, now I have made some changes so that HeatSink fits better and add a ptfe clip space.
I will try everything on the printer and if everything works properly I will upload the files.

/Runar

Great Will help you test when i get my Linear rails.. i have been using my own remix with v wheels some time now. Only thing iam not happy about is the cables infront og the hotend.. would be perfect if it was like the prusa in the back. Great job with the ptfe clip!

Hi, there is no space between the stepper motor and the house. What do you mean by "ptfe clip space" if that's what I think, then it's the clip that locked the PTFE tube? I have not checked this but will check it out. I'm making some changes, so a version 2 is underway.

Cheers
Runar

I was thinking since we No longer use the v wheels that there were space for cables to go out in the back right under the stepper.
Yes ptfe clip that hold the bowder in the v6

Hi, now I'm done with version 2. I have printed and it works as it should and fine prints. I took some pictures you might be able to see if you can fit the cables you want.

/Runar

Great job.. ! Its hard to see if it could fit.. this is the only thing i dont like about the design. Right now i have the cables in the front.. How do you like the linear rails compaired to the wheels?

Not easy to photograph :-). This may be a better picture. I would think it could work.

Yes.. maby if the prusa cable guide is turned 90° so the cables slip in from the open side.. do you like the idea?

I don't know, you have to try