If you want to see what else is in the works, follow my instagram! @wiseprints206
This is a recent creation of mine, called the Legacy Sword. It has two blades and a taser that arcs between them. Theoretically, one blade is for sparring others, and the second blade would be for slicing. The build features a built in 18650 in the handle, and a charging port to power the taser and led. If you want to see it work, check out my instagram @wiseprints206!
If you want to build this, the electronics are optional! Just make one without electronics if you don't want to wire it.
-transparent blue pla
-transparent red pla
-solder iron + solder
-tin snips + file
-number 16-20 AWG wire
-favorite glue for printing
-2 part epoxy to stick aluminum to plastic https://www.amazon.com/Crystal-Clear-Table-Coating-Tabletop/dp/B01LYK2NAG/ref=sr_1_10?keywords=2+part+epoxy&qid=1567962665&s=gateway&sr=8-10
-1x sheet of aluminium to cut into strips (it lines the inside of blade for the taser arc. This can be found at most hardware stores.)
-2x 6mmx600mm rods. These are also at your local hardware store. Its ok if they are a bit smaller than 6mm, they go inside the blades to give strength. If they are smaller, just coat them in glue when you stick em in the blades and you will be good to go.
-1x 18650 battery (doesn't have to be this one specifically, just an 18650) https://www.amazon.com/dianagold-Rechargeable-Battery-2500mAh-Button/dp/B07WS8TR5C/ref=sr_1_5?crid=3CVUJFU13CS8D&keywords=18650+battery&qid=1567961597&s=gateway&sprefix=18650%2Caps%2C224&sr=8-5
-1x rgb led (or any color you like) https://www.amazon.com/gp/product/B00RTE5JC4/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
-1x taser module (its a step up voltage transformer technically) https://www.amazon.com/gp/product/B01GM9B4R0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
-1x battery charger module (this is what I bought and sized the handle space accordingly) https://www.amazon.com/Onyehn-Lithium-Battery-Protection-Charger/dp/B07D3SQYKJ/ref=sr_1_3?keywords=18650+power+supply+module&qid=1567961947&s=electronics&sr=1-3
-1x push button switch (amazon seems to only sell them in 10+ quantities) https://www.amazon.com/Clyxgs-Button-Switch-Momentary-20-Pack/dp/B07L1L5MZ3/ref=sr_1_1?keywords=Clyxgs+push+button+switch&qid=1567962314&s=electronics&sr=8-1
-1x on/off rocker switch (i ordered 20x but these should be identical) https://www.amazon.com/5Pcs-Snap-Position-Rocker-Switch/dp/B0725Z6FR7/ref=sr_1_4?crid=XQKC86G7GEU&keywords=on%2Foff+rocker+switch&qid=1567962424&s=gateway&sprefix=on%2Foff+rocker%2Caps%2C206&sr=8-4