Back
Contents
Tags
License
Liked By View All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing TagSummary
This is a combo of a few z-axis fixes. I have taken the philosophies of each, made them modular and slightly modded them to adapt into this full Z axis solution. you can find them on Thingiverse if you look. I will post them asap
Some brief sanding may be required depending on the accuracy of your printer and the bored holes.
Print settings? make it strong. I don't see why you would need anything beyond 40% infill but run 100 if you like.
Credit to previous designs that i modded.
https://www.thingiverse.com/thing:3070132
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.4?
Infill:
40+?
Post-Printing
I used a Dremel with the Barrel Sander for a couple passes in the main stiffener holes if it was too tight.
DO NOT FORCE THE BEARING HOLDERS IN. IT MAY BREAK THE BEARING HOLDERS IF TOO MUCH FORCE IS APPLIED.
More from 3D Printer Parts
