This is a Walkman styled protective case for Sony's WF-1000XM3 True Wireless Earbuds. The charging case provided with the earbuds will fit into this piece for both protection and style.
Walkman Buttons, Logos, and Decals borrowed from Remanater's excellent model.
After applying a black primer coat to both pieces, I painted the top of the case with a silver acrylic paint and the bottom with a mix of silver and blue. I applied white to all the text detail, orange to the button, and green to the headphone "plugs".
Adding the clip
For the clip, I found a thin piece of copper colored metal, cut and filed it, and bent it into a clip shape, I then glued this to the back of the case. .
First, I used Fusion360 to model the actual charging case as accurately as possible. This was so I could use it as a reference when modeling the Walkman Case.
Remanater's Walkman Model Canibalization
I downloaded Remanater's Walkman, and using 3D Builder I chopped it up, leaving all the details adorning the outside of the Walkman behind, such as buttons and logos. I later attached these pieces to the outside of my Case Model
Modeling the Walkman Case
Using the Model of the case I had created as reference, I modeled the Walkman in Fusion360, then cut a hole into it the exact size of the case. I then attached all the walkman buttons and logos I had chopped off of Remanater's model.