I decided to replace the drilling depth support and the protective visor in the Parkside PTBM 500 B2 column drill, because the original one was unreliable.
The drilling depth support consists of two semi-shells joined together with 20mm screws and bolts M4.
The support for the protective visor has been designed to reuse the transparent part of the old protection.
The original screws, bolts and springs were used for assembly.
06/12/19 Update Protection_Parkside_PTBM_500_B2 with end stop.
If you like my projects support my work by leaving a tip. Thanks.
Ring_Parkside_PTBM_500_B2.stl Supports yes
Protection_Parkside_PTBM_500_B2.stl Supports No