I am new to Fusion 360, and had very little time in Tinkercad previously, but Tinkercad lacked some features that I wanted, so I started learning Fusion 360, I wanted some threaded stands for myself, and to possibly do giveaways in my tiny vape group, and this simple atomizer stand was born. I needed one that I could do with what I wished without worrying about licenses printing other people's things.
Printed at 80mms, 200c Hotend, 60c Bed, 95% flow
I used 4 walls to ensure enough material was available to tap
Additional steps after print
You will need a M7x5 tap to tap the holes
The hole centers are 40mm apart
If your holes didn't come out at 6.5mm you will need to drill them to 6.5mm
New to Fusion 360, I had designed a smaller 4x stand that would handle 25mm atomizers, knowing that I have bigger atomizers, and so do other people, I came up with this one. This one will easily to 35mm atomizers, maybe 40, the hole centers are 40mm apart so that might be a stretch.
If this thing is popular enough, I will work on bigger and better stands