This is a molle mounted caddy to hold 6 Spring Thunder shells. The caddy is two molle columns wide and can be mounted directly next to each other. The shells are held in place with an elastic band that is wrapped all the way around the caddy. I designed this to be mounted to a drop leg molle panel but it may also work fine on a chest rig.
Extra materials required:
-8x 1/2" long 6-32 counter sunk maching screws (these are the same scews used for the rail in the Spring Thunder)
-3/4" wide elastic band (commonly available in white or black, available on amazon or sewing supply stores or sewing supply sections of department stores)
Create a loop by overlapping one inch of the elastic band onto itself and sew the two ends together.
After you've made your elastic band into a loop stretch it onto the caddy. Once the elastic band is in place, use the machine screws to mount the four brackets. Do not over tighten. The top three brackets are all the same, the bottom bracket it unique.