Just some different styled bases for your 'mechs. From the older 1st/2nd Edition up to the latest 5th Edition. Also, 1/100 sclae bases for your 'mech models and statues or other projects.
Battletech_Base_1and2ed: For older metal Ral Partha/Iron Wind models as well for 2nd Edition plastic models with flat hex base. With a hole for washers/magnets.
Battletech_Base_4edTo5ed:For adapting the odd half-hex based 'mechs from the 4th Edition (Base game and Alpha Strike) to full-hex 5th Edition. Sanding/filing could be required since half-hex bases have slightly different sizes deppending of model/material/batch.
Battletech_Base_5ed: Plain full-hex 5th edition style base. With a hole for washers/magnets.
Battletech_Base_1-100: 1/100 scale flat hex for models and statues. With holes for washers/magnets.
Battletech_Base_1-100_scifi: 1/100 scale flat hex with basic sci-fi decoration. With holes for washers/magnets.
Battletech_Base_1-100_Raised: 1/100 raised plain hex in a old style fashion. With holes for washers/magnets.
- Battletech_Base_1-100_RaEn: 1/100 raised engraved hex in a old style fashion. With holes for washers/magnets.
Note 1: 3rd Edition bases where the same as 5th ones, but with the engravedd 'mech model number in the front side. They were molded along with the mini so 'mech were already based and ready to use with none or minimun assembly (ie: Marauder) when cut off the sprue.
Note 2: Washer/magnet hole is 12mm by 1.6mm (DIN 125 M6 washer)