INFO: Renderings and pictures in this preview are missing (thingiverse seems to be buggy). Be sure, all files are available and I also added a ZIP with the detailled fotos.
This is a Pinzgauer 712k (6x6) designed by WID for Orlandoo Size (1/29).
Print at best below 100 microns.
A number in the file name such as "P71xWheels(7).stl" means you need to print it seven times. You may need to turn the files in the slicer so they lay flat. Some parts need support. I printed all with a 0,35mm nozzle setting at 80 microns. The window forms are just as a form - i recommend to cut some out of a clear plastic sheet.
I didn't had the time yet to do a mounting guide, but for Orlandoo fans it's pretty simple. The basic hardware you need is a Orlandoo Jeep (OH35A01) kit, an additional 50mm metal passtrough axle, additional ballheads, links and shocks. The rear axle is linked to the passthrough axle with two upper links. I used two spare-parts out of the Jeep-Kit (in the Orlandoo kit it's meant as mounting points for the servo on the chassis rails) to make an easy mount for the rear upper links to the metal axle (see pictures). I assume other solutions with double ball heads or things like this will also work.
The printed chassis is mounted together with Orlandoo 1505 screws. The side-body panels and the interior are mounted with 1503 screws.
The light-plates are designed to hold 1206 SMD LED. The clear light plates are meant to be glued on the body.
In case you have any questions or you'd like to see new upcoming designs, look up "WID RC Design" (https://www.facebook.com/groups/2314032072242434/) on Facebook and join. I would be pleased to welcome you!
I try to optimize my designs continuously to provide you the best experience.
--> If you like my designs please feel free to leave a TIP.
Please respect the lincense. You're not allowed to use this for commercial use or changing the design. Please post a make and give an appropriate attribution.