+++new Version: Fully closed Version (no opening) this one can be scaled down better - coin slot is larger. if u scale it down to 75% it should be usable with most coins
+++new Version: V75% is scaled down to 75%. some adjustment have been made that the brim print at 0.2mm and the slits have been made bigger so that all coins still fit through
Longest print so far on my mk3, 71 hours, 950g.
this Version has no text on the Top, u can add some urself if needed
Its a piggy/money bank i designed for my son using Fusion 360. Fusion and STEP files are available to download.
designed to print on my prusa mk3.
Prusa Slicer, Profile: Stardard 0.20mm FAST MK3, i reduced infill, decrease infill speed, and increased inner perimeter speads.
Chris Warkockis PLA profiles should be perfect for this print.
i would suggest an infill patteren that doesnt make the printer shake so much, i used Grid.
u can also print this puzzle stl to use for the inside of my puzzle cap
this cap can be used instead of my one, its more difficult. try printing slightly smaller like at a scale of 99.5%. 100% was slightly tight i used veg. Oil so it would work easier
u can try make ur own puzzle cap here:
(i didnt know how to use the customizer but i guess some smarter people know how)