Hi everyone, this is my "Cactus Lamp".
The print is really easy and I hope you'll like it.
- "1_Cactus.stl", print with 0% infill and no bottom layer. The wall thickness must be 1.6 mm (you can rotate it 45° if your printer is not big enough, as I have done);
- "2_Plant_Pot.stl", you can print it normally (infill and wall as you want);
- "3_Joint.stl", you can print it normally (infill and wall as you want).
NO SUPPORTS ARE NEEDED!
Thank you, good printing!
1_Cactus.stl (0% infill,no bottom layers, 1.6mm wall)
Assembly is simple: you only need to fit the pieces together.
You can follow the video below: