This is a Pinzgauer 710k designed by WID for Orlandoo Size (1/29).
Print at best below 100 microns.
A number in the file name such as "P710Wheels(5).stl" means you need to print it five times. You may need to turn the files in the slicer so they lay flat. Some parts need support. The window forms are just as a form - i recommend to cut some out of a clear plastic sheet. I printed all with a 0,35mm nozzle setting at 80 microns.
I didn't had the time yet to do a mounting guide, but for Orlandoo fans it's pretty simple. The basic hardware you need is a Orlandoo Jeep (OH35A01) kit. The printed chassis is mounted together with Orlandoo 1505 screws. The side-body panels and the interior are mounted with 1503 screws. I added some photos wich will help.
The light-plates are designed to hold 1206 SMD LED. The clear light plates are meant to be glued on the body.
In case you have any questions or you'd like to see new upcoming designs, look up "WID RC Design" (https://www.facebook.com/groups/2314032072242434/) on Facebook and join. I would be pleased to welcome you!
I try to optimize my designs continuously to provide you the best experience.
--> If you like my designs please feel free to leave a TIP.
Please respect the lincense. You're not allowed to use this for commercial use or changing the design. Please post a make and give an appropriate attribution.