This small Stevenson Hut is meant for housing an outside sensor of popular weather stations. Many cheaper weather stations have a poor shield for their outdoor sensor. This modular case provides a decent shield for the sensor. Thanks to the modular design the size of the shield can be adapted to your sensor. Print the roof and bottom first, then as many shells you like to place in between. Use M4 threaded rods and nuts/washers to keep the thing together.
I originally designed this one for the outdoor sensor of my old WS2300, but I expect there's enough room inside to house most small commercial and homebrew temperature/humidity/pressure sensors.
The mount allows you to place the hut on a 36mm pole. Get yourself a hose clamp to fixate it.