This is a city bus toy, the short version of the articulated one here https://www.thingiverse.com/thing:3745836
It is completely 3d printable.
The tolerance for pieces that need to fit tightly is 0.1mm,
for pieces that need to allow movement (like screws and axles) 0.3mm.
Nb. STL file name rezolution support colour position
The front face, back face and body where printed with changing the materials for a "multi-colour" effect:
- body - print "upside down" and change the filament at the desired hight (white - blue)
- front face - print with "lights pointing up" - change the filament at 3.7mm and 4.4mm (blue - white - blue)
- back face - print with "lights pointing up" - change the filament at 3.6mm and 4.1mm (yellow - blue - yellow)
For the model assembly see the uploaded pics, starting from the one with all the pieces layed out.
If something is not clear, just ask.
My make of it is at 120% scale and it did not fit on my cr10 mini, so that's the base and the body STL files are offered in a "whole" as well as in a split version.
If You like the model, a tip will be appreciated ;)