This is a wall mount for my light saber created at Savi's Workshop at Disneyland Galaxy Edge.
I designed the mount to support either a vertical wall mount, or a horizontal/angled method of mounting on the wall. Even includes a 3D printed thumbscrew so you can easily remove it to show to friends, along with a slot to accept printed logos (Resistance, Jedi Order, and First Order coming soon).
My configuration is the Elemental Nature variety, with the parts I chose when building it shown in the picture.
There are a lot of combinations and permutations of the light saber you build at Savi's. Although this one fits my build, it's entirely possible that it may also fit yours (specifically the clamp).
I may be able to help create parts to support more combinations if you post pictures and dimensions of your configuration. Also, my light saber was created on day 1 of Disneyland's Cast Member previews, so I hope dimensions haven't changed since then. Feel free to comment if you encounter this.
You'll need a 3mm x 20mm screw and nut to hold the clamp together. The clamp is pinched shut using the 3D printed thumbscrew, which should print fine at 0.2mm layer height with a reasonably adjusted printer. The mounting holes are sized for most typical drywall anchor screws (at least in the USA).
Please post a make if you end up using this. Til the Spire!
Supports are only needed in the hinge area on the Clamp portion.