MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Printed in orange PLA 200/60 0.2mm layers, 6mm brim. The opening above the leds from the PCB was covered with a small piece of poly-carbonate I had laying around, size 4x4x20mm, sanded to fit.The button was printed in white PLA, same settings as the housing.
I used 4 screws M3x10 countersunk for the cover. No need to tap the housing. Hot-glue for the PCB and 18650's to attach to the housing.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.