What: Press Fit Protective Covers/Caps for a Rennsteig Flat Cold Chisel with SDS max chuck P/N 600000 RT
Why: Chisel is used for Gem prospecting and the covers/caps are to prevent the chisel from punching/tearing a hole in the backpack.
.30 mm with a .6 mm nizzle
ColorFabb nGen Flex
Chisel Tip - Rotate 180 degrees X in Slic3r or equivalent
Chisel Top - Rotate 90 degrees X in Slic3r or equivalent
Design and Parameters
Designed for nGenFlex The tolerance factor for the tip was .5mm for the Top it was .25 mm.
Width = 25.5 mm
Length = 38.5 mm
Wall Thickness = 2 mm
Hole Diameter= 18.25
Height = 30 mm
Brim = 10 mm
Wall Thickness = 3 mm