MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
FIXED all parts! Attention!
If you downloaded the files on the day of release (2019-07-24) you could still have parts that are cut wrong and the two halfes won't fit together. please download the files again.
And also there was a problem with the files for the vents and the support foots.
My appologies if you already downloaded it.
A Pipeline set compatible to the Sector Mechanicus terrain.
The connection points have a diameter of 26mm on the outside and 20mm inside.
At the end of each piece is a cut for a magnet with 16mm diameter and 3mm depth.
The vents fit over the hole to cover the Magnet and to make the end look nice if not connected further.
The overview picture helps finding the correct files that belong together.
ST1, ST2, ST3, T1, T2: this parts are 122mm long which is the Sector Mechanicus walkway height.
L, S: they fit the connection height of the Ferratonic furnace or other SM parts and has a connection height of 61mm
T2: the side connection is also compatible with the middle connection of the Ferratonic furnace (61mm)
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.