MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
This is a small fixture block, which is designed to be used with a fixture plate. They can be used to make any number of simple jigs and fixtures. I probably wouldn't use this to hold a part for machining, but it would be great for a drill press or assembly application.
This block is designed to fit my whole ecosystem of 3D printed fixtures:
The holes are spaced a half-inch apart. Most of the holes are clearance holes for a 1/4-20 SHCS, but four of the holes are a tight fit on a 1/4" dowel pin, which will allow you to index a precise location on the fixture plates, this is probably overkill for a 3D printed fixture but may come in handy. This project was inspired by the Saunders Machine Works fixture plates, if you need a fixture plate for machining, they are the best source.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.