A little useless thing for the new Planet Eclipse MG100 marker.
Have no issues using DAM mags or others with regular followers? Then this is for you - a bolt catcher that will stop the bolt when the chamber is empty. Maybe even when the paint is smashed
Tested during a full day of play with a few dozen mags, works flawlessly.
A .step file available for modification.
If you intend to print those for sale, i'd appreciate a nod, and a tip :)
There are two versions, V3 and V4. V4 adds a round in chamber flag. You will need a V3 B with it. Print part V4 C in bright color with support.
Print with 4 perimeters. Make sure your prints are accurate and have a good surface finish before starting on this, rough prints would require quite a bit of finishing to get the block drop easily.
You will need:
one M3-6 button head screw,
one M3-12 or M3-10 socket head screw
one M3 nut, to assemble it and hold it on.
You can also drop in a small and light spring inside part B so not to rely on gravity for activation of part C
Make sure the spring is light - heavy will cause issues.