I made this because I was sick and tired of having these zip ties all over and not being able to find one when needed. This is most likely overkill but the printer does all the hard work.
Organizer holds 4", 8" & 11" ties
3D Solutech PLA
Real Black / Yellow
The organizer itself was printed with 3 walls 20% infill and .2 layer height. I used supports so there were no problems near the end of the print. This one is going to take awhile. Almost maxed out my machine in the Z axis.
The color accents were printed with .15 layer 3 walls and 10% infill. Supports only touching build plate.
2 short strips - 1 long bottom strip - 1 long top strip needed