Printed superpotatofudge's fan shroud and it doesn't quite fit right on the Microswiss all-metal hotend for the CR10S Pro.
The microswiss heatsink is a rectangle cross section 12x20mm, the Mk8 heatsink is rounded on the sides. Also the mounting holes on the microswiss are way too high on the block for the position on this shroud.
So, I moved the mounting bar upwards by 10mm, and subtracted a block the shape of the microswiss block, to make it fit correctly. I'll find out later today if the thing fits right.
Update: item fits fine but barely touches the top of the silicone sock. I'm going to run it for a while to see if this is a problem and I need to alter the model slightly.