MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Should fit most common tripods.
Printed in ABS.
See last picture for specs on D-ring screw.
When mounting screw, just screw it into the plastic hole. When the threads are all the way through, it should keep itself in place. Do NOT widen the hole D-ring to much or else it will fail to stay in place. Use a very small wood screw (Ø: 2.5 mm, length 12 mm) to fasten the button to the adapter.
Some modification is required for the button to get a tight fit.
Originally this design was a test for 1 mm nozzle, 0.5 mm layer height, but it should print fine using .4 nozzle.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.