MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
(Designed for 3mm wood screws, but with some force you should be able to use ordinary M3 screws)
For now the button is in two peices that needs to be glued together(the bottom sides),
then glued to the top part of the case in the cut out. The little spike on the "button pin" should be at the same side as the display.
(see image here)
Hope you like it! Post your "Makes" and if you have any questions post a comment :)
If you found my design useful and appreciate the time I spent making it, feel free to help me buy some filament !
Print the button + button pin and cable "clamp" with high infill, i used 100% and pattern "lines" to make it solid.
Walls: use a minimum of 3 walls ~1.2mm so the screws have enough to "bite" in to.
Tolerance is ~0.2mm and other places upp to 0.5mm(button & hole)
Optimal cable size for the cable clamps, 2-3mm.
More from Electronics
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving solding a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.