I made this from the "Triple-Wall Twist Container (Customizable) " default file in a simple software called 3d builder that I've become comfortable with.
I made my first one twice as tall as the original file with a slight shrunken diameter to fit an 18650 battery. The threads in V1 are the height of the print which equals a LOT of twisting so in my V2 I the threads are the height of the original.
I'm printing it as I post this, When I confirm the threads bottom out in the print I'll change this from a work in progress to finished.
The double container V2 uses both a regular v2 container ca and a v2 container cap with the cutaway to allow the second chamber to seal.
- Caps were a little too tall as well as the cutaway not quite lining up. Please hold off on printing until I finish up.
** The V2 of the cap with the cutaway still didn't line up quite well enough. PRinting one more time. will probably finalize file tomorrow.
And thanx for the interest PEEPS!!!!