Greetings to all,
Here you will find a mug that has the Star Trek Discovery, Star Fleet, Engineers insignia on it. It is made for right favoring dexterous beings, but if you want it as a lefty just ask. I was not planning on doing the other badges, but if it pleases you or you have a request I would be happy to do that for you if I can.
There is also a cup. It is the same as the mug, but with no handle, so yeah... This can be used by (of an implement) ambidextrous beings...
Please feel free to comment or ask questions or to enlighten, seeing as how I am new to Thingiverse and 3D Printing and using FreeCAD.
Update: I added the lefty version and a ambidextrous mug(two handle) which also doubles as a sipi cup for kids., and I added two lids. one is a mug or cup lid and the other is a sipi cup lid, all of these are interchangeable(cup, mug, sipi lid, mug lid, cup lid).
200 C, 50 C for hot end and bed.
Overview and Background
I really like the insignia and fantasize a bit about being on a ship and exploring other planets and moons, problem solving and building a new world. I also like tea, coffee and water. The mug helps.
Lesson Plan and Activity
Step 1, turn on your printer.
Step 2, load the mug STL file.
Step 3, Slice the mug STL file.
Step 4, Print the mug.
Step 5, Clean mug ( water boils at 212F or 100C, PLA melts or gets soft around 150C)
Use your best judgement.
I would not go to a full boil with this.
If you have a clean enough print, you could make it into a plaster mold, and make a ceramic mug if your into ceramics.
You will need a computer, 3D Printer, and PLA or comparable material if your going to use hot liquid.